Wps Configuration - ZyXEL Communications P-2812HNU-51c Support Notes

WPS configuration

1. Go to Network>Wireless LAN>WPS. Enable the checkbox to activate the
WPS feature. Click on "Generate" to generate a new key if you wish.
"Apply".
2. Go to Network>Wireless LAN>WPS Station. We will use the "Push Button"
method to establish secure WLAN connection in this example.
You can either click the button located on the top right corner of P2812HNU-51C or
from Network>Wireless LAN>WPS page. After clicking on the button, the
P2812HNU-51C and the WLAN client have 120 seconds to connect.
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes