LAN ports.
Interface Grouping
1. Go to Advanced > Interface Group.
2. There is a Default group which includes all the available interfaces. Click on
"Add" to create a new group. Note: The WAN interfaces created from
previous sections: ppp0.301, and ptm0.401 should also be listed in the WAN
interface column.
Before proceeding to the next step on Interface Grouping, one thing must be kept in
mind: the Default group, which includes all the available interfaces, cannot be
removed. Some Interfaces can be pulled out and placed into another new group. If
the default WAN gateway interface is removed from the default group, then the
interfaces belonging to the Default group will lose their connectivity. Therefore, in
this example, it is better to create a new group for IPTV.
3. Assign the Group name as "IPTV".
4. Select "IPTV.401/ptm0.401" for the WAN Interfaces used in the grouping.
5. Move LAN3, and LAN4 from the "Available LAN Interfaces" box on the right
to the box of "Grouped LAN Interface" on the left.
6. Click "Apply".
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes