Pedals - Life Fitness Lifecycle 9500RHR Series Service Manual

Lifecycle 9500RHR Series Exercise Bikes
How To...REMOVE AND REPLACE THE PEDALS
Tools Required: 5/8 inch open end wrench
STEP 1
To remove the LEFT PEDAL, place a 5/8 inch open end wrench on the PEDAL BOLT and turn the wrench
clockwise.
STEP 2
To remove the RIGHT PEDAL, place a 5/8 inch open end wrench on the PEDAL BOLT and turn the wrench
counterclockwise.
STEP 3
Install the new PEDALS onto the CRANK
ARMS. To tighten the PEDALS, place a 5/8
Left Pedal
inch open end wrench on the PEDAL BOLT.
Move the wrench counterclockwise for the
LEFT PEDAL and clockwise for the RIGHT
PEDAL.
Right Pedal
Pedal Bolt
23