Heart Rate Pc Board - Life Fitness Lifecycle 9500RHR Series Service Manual

Lifecycle 9500RHR Series Exercise Bikes
How To...REMOVE AND REPLACE THE DIGITAL HEART RATE PC BOARD
Tools Required: Phillips screwdriver, pliers
STEP 1
Remove the four SCREWS securing the DISPLAY CONSOLE to the DISPLAY CONSOLE BRACKET.
STEP 2
Unplug the PIN CONNECTORS from the back of the DISPLAY CONSOLE.
STEP 3
Remove the SCREWS securing the back of the DISPLAY CONSOLE to the OVERLAY FACE-PLATE. Set the
OVERLAY face down on a non-abrasive, flat surface.
STEP 4
Ground yourself to the machine by attaching one end of a DISPOSABLE ANTI-STATIC GROUNDING STRAP to
your wrist and the other to a suitable grounding point on the exercise bike (e.g.: the metal part of the pedal crank
shaft).
STEP 5
Use the pliers to squeeze the tips of the five SPACERS, one at a time, to allow removal of the HEART RATE PC
BOARD. Before lifting the HEART RATE PC BOARD from position, be aware that an 8-PIN CONNECTOR is
also securing the back of the board in place.
STEP 6
Replace any damaged SPACERS with those included in the kit.
STEP 7
Reverse Steps 1 through 5 to replace all parts in their proper positions.
20
Display Console model
shown for reference only.