Pedals; C1 Water Bottle Holder And Bracket - Life Fitness LIFECYCLE C1 Owner's Manual

Upright lifecycle exercise bikes
Hide thumbs Also See for LIFECYCLE C1:
Table of Contents

Advertisement

3.9
P
EDALS
Tools: 15mm Open End Wrench
Locate the RIGHT PEDAL (EE) (marked with an "R") and PEDAL STRAP
(FF) (marked with an "R"). With the side of the PEDAL STRAP marked with
an "R" facing upward, slide the slotted end of the PEDAL STRAP through
the left slot in the PEDAL. Fasten one of the slots onto the tab located
under the left slot of the PEDAL. Bend the PEDAL STRAP upward and slide
the remaining end of the PEDAL STRAP through the right slot in the
PEDAL and into the strap adjustment clip.
The PEDAL STRAP should securely engage the strap adjustment clip.
Install the RIGHT PEDAL (EE) to the USER RIGHT CRANK ARM (GG).
Repeat for the LEFT PEDAL (marked with an "L") and PEDAL STRAP
(marked with an "L").
Note
Note:
3.10 C1 W
B
H
& B
ATER
OTTLE
OLDER
RACKET
Parts: Hardware Bag #5
(2, 12mm Small Head Phillips Screws)
Tools: Phillips Screwdriver
Locate the WATER BOTTLE BRACKET (HH). Secure the WATER BOTTLE
BRACKET to the underside of the MONOCOLUMN (E) using two 12 mm
SMALL HEAD PHILLIPS SCREWS (16). Tighten the screws securely.
Insert the WATER BOTTLE (JJ) into the WATER BOTTLE BRACKET.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lifecycle c3

Table of Contents