Remote Control - Q-See QSD2308L User Manual

2.4 Remote Control

The remote control uses two AAA batteries, instructions for loading:
STEP1 Open the battery cover of the Remote Control
STEP2 Insert batteries with the poles (+ and -) correctly aligned
STEP3 Replace the battery cover
Note: If remote does not function check the following:
1. Check polarity of batteries
2. Check the remaining charge in the batteries
3. Check to see if remote control sensor is blocked
If it doesn't still work, exchange for a new remote control or contact your dealer.
The interface of the remote control is shown in Fig 2.10
Item Name
1 Power Button
2 INFO Button
3 REC Button
4 Number Buttons
Multi Screen
5
Button
6 SEARCH Button
7 MENU Button
8 ENTER Button
9 Direction Button
10 +/- Button
Playback
11
Control Button
12 AUDIO Button
Auto Dwell
13
Button
14 BACKUP Button
PTZ Control
15
Button
QSD2308L/QSD2316L DVR User's Manual
Fig 2.8 Remote Control
Push button softly to stop firmware running before pushing harder to
power off.
Get information about the DVR such as firmware version, HDD
information
To record manually
Input numbers or choose camera
To choose multiple screen display mode
To enter search mode
To enter menu
To confirm the choice or setup
Move cursor in setup or control PTZ camera
To increase or decrease the value in setup
To control playback. Fast forward/rewind/stop/single frame play
To enable audio output in live mode
To enter auto dwell mode
To enter backup mode
To control PTZ camera. Move camera/ZOOM/FOCUS/IRIS/SPEED
control
Table 2.2 Functions of Remote Control Buttons
Function
11