Q-See QSD2308L User Manual page 73

④ Then click ok to finish setup.
b. Other plug-ins or anti-virus programs may be blocking ActiveX. Please uninstall or
close them.
Q8: What can I do when the DVR starts and displays "please wait......"all
the time?
First possible reason: hard drive power cable and/or data cable are not
securely connected.
Solution: Please check the cable connections and make sure they are
secure; if still not working, please unplug them and then plug them in
again.
Second possible reason: The system is having problems reading the hard
drive.
Solution: Try reformatting the current drive or re-placing it.
Q9: Why isn't the mouse I have plugged into the front USB port working?
The front USB port is only for backup to USB flash drive, and does not
support a USB mouse. Please use the USB port on the rear panel if using
a mouse.
Q10: How do I input password and digital numbers?
To input password and digital numbers click the box behind password or
items where you need to input numbers, and then a small keyboard will
appear. Please select number or letter to input (the default password is
123456), or you can use the digital keys on the front panel, or the digital
keys on the remote control.
Q11: How do I upgrade the firmware on the DVR?
After you download the new firmware from the Q-See website at
www.q-see.com, copy it onto a USB flash drive, and then select "upgrade"
in the menu. If upgrading the kernel procedure, please refer to the
following method: firstly insert U disk into DVR, and then input "adwsws" in
the password of system login and the system will upgrade kernel
procedure automatically. After finished, please restart DVR to achieve.
Notice: Do not power off the system during the upgrade process!
Otherwise, it may damage the chipset and prevent the DVR from
starting.
QSD2308L/QSD2316L DVR User's Manual
69