User Interface Display Identifi Cation - Follett E7UC100A Installation, Operation And Service Manual

Service
(continued)

User Interface Display Identifi cation

24 Undercounter Dispenser and Ice machine E7UC100A/E7UD100A
––––––––––––––––––––––––––––––––––––––––––––––––––
Operation Display
PM
Condition
Normal
operation
Cleaning Mode Press and release maintenance/
clean switch to clean the user
interface without dispensing ice or
water (see
Mode on page
Drip tray full Empty drip tray.
Six-month fi lter Follow Maintenance Mode
maintenance procedure (below) and also see
required Cleaning and Sanitizing on page
11.
Maintenance Enter Maintenance Mode by
Mode pressing maintenance/clean switch
until
cleaning and sanitizing procedure
shown on
the fi lter, if so equipped. Exit
Maintenance Mode by pressing
and holding maintenance/clean
switch until
displays.
Service - 8000 Call Follett Technical Service Group
hr bushing
at (877) 612-5086 or +1 (610) 252-
check
7301. The fl ashing wrench indicates
that the 8000 hr bushing check is
required.
Procedure
—
Maintenance/Cleaning
9).
displays. Complete the
page 11 and change
no longer