User Interface Display Identification - Follett 7CI100A Installation, Operation And Service Manual

Service
(continued)

User Interface Display Identification

Operation Display
36 Sparkling Ice and Water Dispenser 7CI100A/7FS100A, 15CI100A/15FS100A
––––––––––––––––––––––––––––––––––––––––––––––––––––
PM
Condition
Normal
operation
Cleaning Press and release maintenance/
Mode clean switch to clean the user
interface without dispensing ice or
water (see
Mode on page
Drip tray full Empty drip tray .
Six-month Follow Maintenance Mode
periodic procedure (below) and also see
NSF-approved Cleaning and
maintenance
Sanitizing Procedure on page
required
21.
Maintenance Enter Maintenance Mode by
Mode pressing maintenance/clean switch
until
cleaning and sanitizing procedure
shown on
the filter, if so equipped . Exit
Maintenance Mode by pressing and
holding maintenance/clean switch
until
Service - Call Follett Technical Service Group
8000 hr at (877) 612-5086 or +1 (610) 252-
bushing 7301 . The flashing wrench indicates
check that the 8000 hr bushing check is
required .
Procedure
—
Maintenance/Cleaning
19).
displays . Complete the
page 21
and change
no longer displays .