Filter Display Indicator Activation - Follett E7UC100A Installation, Operation And Service Manual

Filter Display Indicator Activation –––––––––––––––––––––––––––––––––––
If you purchased your dispenser with a Follett fi lter, the fi lter display
indicator activation has been preset at the factory.
If you are using an "after market fi lter," an adjustment may be made
to activate the "Fresh Filtered Ice & Water" display and a six-month
maintenance reminder on the User Interface.
Activating "Fresh Filtered Ice & Water"
1. Remove the front panel as explained in
Components on page 9
2. Remove top panel (Fig. 7.1).
3. Remove (1) screw and top of control board enclosure (Fig. 7.2).
4. Locate the DIP switch on the dispenser's control board (Fig. 8).
Use a fi ne-pointed object to move the "Filter" DIP switch to the
ON position.
Deactivating the Six-Month Maintenance Reminder
1. Use a fi ne-pointed object to move the "External Filter" DIP
switch to the ON position.
OFF
Not used (OFF position)
Ice only
No internal filter
Not used (OFF position)
Not used (OFF position)
15 minute delay
Not used (OFF position)
Six-month PM enabled
10 Undercounter Dispenser and Ice machine E7UC100A/E7UD100A
Accessing Internal
then refer to Fig. 7.
ON
Ice & water
Internal filter supplied or to display "Fresh Filtered"
30 minute delay
Six-month PM disabled
Fig. 7
1
2
Fig. 8