User Interface Display Identification - Follett 7CI100A Series Installation, Operation And Service Manual

Service
(continued)

User Interface Display Identification

Operation Display
––––––––––––––––––––––––––––––––––––––––––––––––––––
Condition
Normal
operation
Cleaning Mode
Drip tray full
Six-month
periodic
maintenance
required
Maintenance
Mode
Service -
8000 hr
bushing check
Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz
Procedure
—
Press and release maintenanc_lean
switch to clean the user interface
without dispensing ice or water (see
Maintenance/Cleaning Mode on page
12).
Empty drip tray .
Follow Maintenance Mode procedure
NSF-approved
(below) and also see
Cleaning and Sanitizing Procedure on
page 14.
Enter Maintenance Mode by pressing
maintenanc_lean switch until
displays . Complete the cleaning and
sanitizing procedure shown on
14
and change the filter, if so
equipped . Exit Maintenance Mode by
pressing and holding maintenanc_lean
switch until no longer displays .
Call Follett Technical Service Group at
(877) 612-5086 or +1 (610) 252-7301 .
The flashing wrench indicates that the
8000 hr bushing check is required .
page
27