User Interface Display Identification - Follett 15CI100A Installation, Operation And Service Manual

User Interface Display Identification

Operation Display
PM
Condition
Normal
operation
Cleaning Mode Press and release maintenance/clean
switch to clean the user interface without
dispensing ice or water.
Drip tray full Empty drip tray.
Six-month Follow Maintenance Mode procedure
periodic (below) and also see
Sanitizing
maintenance
required
Maintenance Enter Maintenance Mode by pressing
Mode maintenance/clean switch until
displays. Complete the cleaning and
sanitizing procedure and change the
filter, if so equipped. Exit Maintenance
Mode by pressing and holding
maintenance/clean switch until
longer displays.
Service - Call Follett Technical Service Group at
8000 hr
(877) 612-5086 or +1 (610) 252-7301.
bushing check
The flashing wrench indicates that the
8000 hr bushing check is required.
15CI100A with Rear Drain
Procedure
—
Cleaning and
Procedure.
no
25