Assembly Instructions; Figure; Step - ParaBody CM3 User Manual

ADJUST!
ADJUST!
ADJUST!
ADJUST!

FIGURE 15

STEP 15:

• To set the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN and perform
several repititions at the leg press station.This will relax the cable system and prevent the HEAD PLATE from lifting up.
• If further CABLE ADJUSTMENT is needed, reference the CM3 GYM SYSTEM assembly instructions.
THIS CONCLUDES THE ASSEMBLY OF THE CM3-LP5A-103 LEG PRESS ADAPTER KIT
13