ParaBody CM3 User Manual page 9

1
8
7
FIGURE 8
STEP 8:
• SECURELY attach the LP5 LEG PRESS to the LEG PRESS ADAPTOR (1) using two 3/8" X 2-3/4" BOLTS (10), two 3/8"
WASHERS (7), and two 3/8" LOCK NUTS (8). See FIGURE 8.
FIGURE 9
STEP 9:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2" PULLEY (5) and SECURELY assemble the 3-1/2" PULLEY (5) to
the BRACKET (from the 100 LEG PRESS ) using one 3/8 X 1-3/4" BOLT (9), one 3/8" WASHER (7), one CABLE CLIP (16) and
one 3/8" LOCK NUT (8) as shown in FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.
10 3/8 X 2-3/4"
5
16
7
9
SEAT FRAME
8
BRACKET
4
9 3/8 X 1-3/4"