User Interface; Using The Display; Selecting View Mode Options - Burnham ALPINE Installation, Operation And Service Instructions

Xii. Operation (continued)
D.

User Interface

1. Using The Display

The Sage2.1 uses a state-of-the-art touch screen display. The following is a display arrangement overview:
Figure 56: Display arrangement Overview
Note: The "Home Screen" is the default screen. Any screen left untouched for more than four minutes will revert to the home
screen.

2. Selecting View Mode options

Dynamic Value (live data): Measured temperatures
are shown throughout the user interface. If the sensor
has failed or is miswired the value will be shown as a
Reverse Video (background black and value white) to
indicate that there is a problem with the sensor.
Screen Links:
"Information": The "
the presence of an Information screen.
These screens explain screen content
and provide other helpful information.
Next screen: The "
indicates the presence of additional
screens.
Back to Previous: This button selects the previous
screen or allows the user to leave
this display level and return to the
previous level. Repeatedly pressing

"Home" screen.
i
" screen link symbol indicates
< >
" or " " screen link symbol
button will return you to the
Dynamic value
(live data)
(turns Reverse Video
Reverse Video
when sensor
miswired or failed)
i
"Information"
Page Link
Supply
< Return
Stack
Rate
100%
i
Active Faults
Lockout History
Sequencer Setup
Service Contract
Status
180
F
>
180
F
180
F
Back to previous
Page Link
Go To Button
Page Link
Next screen
Page Link
99