Assigning Domain Users To The Mmb; Setting Up The Management Blade - Fujitsu PRIMERGY BX400 User Manual

Global user management
When configuration is performed you can execute the SVS_LDAPDeployer by opening a CMD window, navigating
to the SVS_LDAPDeployer folder and using the following command:
# java -jar SVS_LdapDeployer.jar -deploy Configuration_InitialDeploy_Generic.xml
The SVS_LDAPDeployer starts, asks for the administrator's password and creates the structure in the eDirectory
which is needed to authenticate users of the MMB.

5.3.3 Assigning domain users to the MMB

To enable a user to log in on the management blade as a domain user, AuthorizationRoles must be set for this user:
1. Create a new user if none exists.
2. Navigate to SVS → Departments → [YourDepartment] → AuthorizationRoles.
3. To add the user to the desired role as a member, mark the role and select Edit. In the popup window add the
user to the [Members] tab.
Figure 43: eDirectory SVS user

5.3.4 Setting up the management blade

Open the BX400 MMB WebUI in advanced mode and navigate to
Information/Operation → User Management→ Global Users. The following screenshot shows an example of the
settings required for communication with an eDirectory Server:
1. Enable LDAP: Enables LDAP authentication.
2. Enable LDAP SSL: Enables SSL communication between the MMB and the eDirectory Server. (Requires a
valid CA certificate to be uploaded to the MMB.)
3. Disable Local Login: Disables the option of logging in without LDAP authentication.
ServerView BX400 Management Blade S1
Configuring an eDirectory server
55