Fujitsu PRIMERGY BX400 User Manual page 46

Configuring an Active Directory Server Global user management
10. Dept. Name: Name of the department.
11. LDAP Auth. User Name: Not required.
12. LDAP Auth. User Password: Not required.
Figure 33: MMB settings Web User Interface
Alternatively MMB configuration can be performed using the SMASH-CLP interface.
Open the BX400 MMB SMASH-CLP interface and navigate to the target:
/OemFujitsuSiemens/AgentInfo/LdapAuthentication.
The settings are the same as in the WebUI and can be set using the command notation:
set [property]="[value]", e.g. set AgentLdapRootDomainName="testdomain1.local"
A Help command is available for every writeable property, e.g. help AgentLdapType.
46 ServerView BX400 Management Blade S1