Control Via Tabs; Monitoring Tab - Fujitsu PRIMERGY BX400 User Manual

Blade server systems

Hide thumbs Also See for PRIMERGY BX400:

Table of Contents

Power management

4.2

Control via tabs

On the Power Management page three tabs are available which are described in detail below:

2. Control tab

3. Configuration tab

4.2.1 Monitoring tab

Figure 16: Power management – monitoring tab

Actual Power Consumption box

The power consumption values of the system unit are displayed in a table, presenting the PSU input and

output values separately.

Power History Options box

The metric Power Monitoring Units can be switched from watts to BTU/h (and vice versa), the power

monitoring history can be enabled/disabled and the period for the power monitoring history can be set. The

period defines the time displayed in the history charts in the Input Power Details box (third box on the page)

below.

Input Power Details box

Here a bar chart and a history chart are available for the system unit and for each server blade separately.

The bar chart of each component shows the minimum, average, peak, limit (if set), and maximum values as

numeric values and as line marks in the bar chart. The different numeric values have different colors corre-

sponding to the line marks. The green bar shows the current power consumption of the respective

component.

ServerView BX400 Management Blade S1

Control via tabs

Table of Contents