Fujitsu PRIMERGY BX400 User Manual page 37

Power management
This setting has to be made if the Power Consumption Options → Consumption Mode was set to Enforced for the
system unit (first box on the page).
Maximum Input Power Limit
For the AC input power, a Maximum Input Power Limit can be defined, e.g. to limit the power consumption to
a value lower than the circuit breaker of the AC line phase allows. The setting value must be a value between
the two values displayed: Actual Possible Minimum Input Power Limit and Maximum Possible Input Power Limit.
PSU Cabling Configuration box
Figure 24: PSU Cabling Configuration box
This setting has to be made if the PSUs of the system unit are connected to more than one AC line phase and the
Power Consumption Options → Enable Cabling Configuration was activated (first box on the page).
PSU Phase Connection
Here you have to inform the system power management about the PSU-phase assignment. For each PSU
select the phase it is connected to.
Adaptive Budgeting box
Figure 25: Adaptive Budgeting box
This setting has to be made if the Power Consumption Options → Consumption Mode was set to Adaptive for the
system unit (first box on the page).
Re-Evaluation Period (1 - 60)
Sets the polling period (in minutes) for re-evaluating the Adaptive Budgeting.
Re-Evaluation Policy
Select Consumption Demand, if the available budget which can be used for server blades is to be distributed
to them according to their consumption in the past. Select Server Blade Priority, if the available budget which
can be used for server blades is to be distributed to them according to their priority. The priority is defined
by the Server Blade Stop Sequence Definition (second box on the page) in which the blade lastly powered off
has the highest priority.
Enable Adaptive Budgeting Event Logging
Enables/disables event log entries caused by Adaptive Budgeting events.
ServerView BX400 Management Blade S1
Control via tabs
37