Control Tab - Fujitsu PRIMERGY BX400 User Manual

Control via tabs
The history chart of each component is hidden under a grey bar marked with a "+" symbol and the
denotation of the respective component. Click on the bar to open the history chart. The colors of the lines
in the chart correspond to the colors in the bar chart.

4.2.2 Control tab

The Control tab is used to power the system unit on and off. Another option allows to power all server blades on/off
if the system unit is on.
Figure 17: Power management – Control tab
Current System Power box
The system unit can be switched off with hard power off or graceful shutdown and off. The system unit can be
switched on (power on) if it is off.
Power Switch box
In the case of Enable: if graceful shutdown and off was selected in the box above and the server does not shut
down in the time specified under Delay After Power-Off Failed, a hard power-off is enforced for the system
unit.
Server Blade Power Control box
Here all server blades can be shut down sequentially (executed in graceful shutdown and off mode) or started
up sequentially when the system unit is running.
32
Power management
ServerView BX400 Management Blade S1