Table of Contents
Advertisement
The MFP network setup tool allows you to configure your MFP.
Refer to
"Pre-configuration information" on page 29
instructions.
P
APER RECOMMENDATIONS
Your MFP will handle a variety of print media, including a range
of paper weights and sizes, transparencies and envelopes. This
section provides general advice on choice of media, and explains
how to use each type.
The best performance will be obtained when using standard 20
~24 lb. (75~90g/m²) paper designed for use in copiers and laser
printers. A suitable types are
>
Hammermill
(90 g/m
>
Xerox
®
>
Oki
Bond (120 g/m
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of MFP. Window envelopes are not suitable.
®
>
Oki
52206301 (100 count)
and
52206302 (500 count)
Transparencies should be of the type designed for use in copiers
and laser printers. We strongly recommend Oki transparencies
(Order No. 52205701). In particular, avoid office transparencies
designed for use by hand with marker pens. These will melt in the
fuser and cause damage.
®
Laser Printer Radiant White, 24 lb. US Bond
²
)
®
4024, 20 lb. US Bond 20 lb. (75 g/m
52206101 Bright White Proofing Paper, 32 lb. US
2
)
Premium Envelopes (size #10)
Getting started > 20
for detailed
²
)
Advertisement
Table of Contents
