Table of Contents
Advertisement
More accurate mfp color
If you have created your own profiles with third-party ICC profile
creation software, these can be download to the MFP and used
when printing.
T
ICC
YPES OF
There are four classes of ICC profile supported by the Graphic Pro
color matching system:
PROFILE
TYPES
RGB Source
(RGB Input)
CMYK
Simulation
(CMYK input)
Printer
(CMYK Output)
Link Profile
G
RAPHIC PRO WORKFLOW
There are three steps to using the Graphic Pro color matching
system:
1.
Gather or create ICC profiles (see below)
2.
Download ICC profiles to the MFP hard disk
3.
Select the ICC profiles in the printer driver when printing
(page
PROFILE SUPPORTED
DESCRIPTION
These profiles describe the device that was used to capture
RGB data (e.g. scanner or digital camera).
The RGB Input Profile may also be your monitor profile if
you are trying to match to your screen.
These profiles describe the CMYK device whose colors you
are trying to simulate. Typically this would be another
manufacturer's printer or an offset printing press.
Profiles are already built-in to the MFP for commercial
printing press inks such as SWOP or Euroscale.
This profile describes the color characteristics of your own
MFP.
The MFP already has factory default profiles built-in, but
you can replace these profiles with your own if required.
This is a special type of ICC profile that converts directly
from CMYK to CMYK.
For example, a link profile could convert directly from the
CMYK space of another printer to the CMYK space of your
MFP.
–
OVERVIEW
201)
A guide to printing > 199
(page
200)
Advertisement
Table of Contents
