Table of Contents
Advertisement
10.
Insert the left end of the cartridge into the top of the
image drum unit first, pushing it against the spring on the
drum unit, then lower the right end of the cartridge down
onto the image drum unit.
11.
Pressing gently down on the cartridge to ensure that it is
firmly seated, push the colored lever (1) towards the rear
of the MFP. This will lock the cartridge into place and
release toner into the image drum unit.
12.
Close the top cover and press down firmly at both sides so
that the cover latches closed.
Toner In in Situ.eps
1
Maintenance > 120
2
1
Advertisement
Table of Contents
