Table of Contents
Advertisement
11.
Holding the complete assembly by its top center, lower it
into place in the MFP, locating the pegs at each end into
their slots in the sides of the MFP cavity.
12.
Close the top cover and press down firmly at both sides so
that the cover latches closed.
13.
Gently lower the scanner.
Note
If you need to return or transport this product for any
reason, please make sure you remove the image drum
unit beforehand and place in the bag provided. This is
to avoid toner spillage.
Scanner down.eps
Maintenance > 126
ID Lower In.eps
Advertisement
Table of Contents
