Specifications; Before Assembly - Schwinn a10 Owner's Manual

Maximum User Weight: 275 lbs. (125 kg)
Power Requirements: 4 D Batteries (LR20) – not included
Operational Voltage: 6VDC
Regulatory Approvals:
Optional AC Power Adapter: UL listed, CSA certified (or
equivalent), Rated 120V 60Hz Input, 9VDC, 500mA Output.
Class 2 or LPS.
This product, its packaging, and components contain
!
chemicals known to the State of California to cause
cancer, birth defects, or reproductive harm. This Notice
is provided in accordance with California's Proposition
65. If you would like additional information, please refer
to our website at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 67" x 56" (1.7m x 1.42m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.
5. The assembly can require 2 people.

SpECIfICATIONS

50" (126cm)
27.5" (67cm)
19" (48cm)
5