Specifications; Before Assembly - Schwinn IC4 Assembly Manual / Owner's Manual

SPECIFICATIONS

Maximum User Weight:
Machine Weight without Dumbbells:
Weight of Dumbbells (supplied with IC4):
Total Surface Area (footprint) of equipment: 6667 cm
Power Requirements
(Power Adapter):
Input Voltage:
Output Voltage:
(Arm Band - supplied with IC4): Rechargeable lithium battery
DO NOT dispose of this product as refuse. This product is to be recycled. For
proper disposal of this product, please follow the prescribed methods at an
approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 2.5 m x 1.8 m (97" x 69").
Basic Assembly Tips
Follow these basic points when you assem-
ble your machine:
• Read and understand the "Important
Safety Instructions" before assembly.
• Collect all the pieces necessary for each
assembly step.
• Using the recommended wrenches, turn
the bolts and nuts to the right (clockwise)
to tighten, and the left (counterclockwise)
to loosen, unless instructed otherwise.
• When attaching 2 pieces, carefully lift and
look through the bolt holes to help insert
the bolt through the holes.
• The assembly requires 2 people.
6
150 kg (330 lbs.)
48.1 kg (106 lbs.)
2.7 kg (6 lbs.)
2
100-240V AC, 50-60Hz, 0.5A
9V DC, 1.5A
1.8m
69"
0.6m
24"
(1033.3 in
2
53.9 cm
(21.2")
2.5m 97"
131.6 cm
123.7 cm
(48.7")
0.6m
24"
0.6m
24"
0.6m
24"
(51.8")