Specifications; Before Assembly - Schwinn IC4/800IC Assembly Manual / Owner's Manual

SPECIFICATIONS

Maximum User Weight:
Machine Weight without Dumbbells:
Weight of Dumbbells (supplied with IC4):
Total Surface Area (footprint) of equipment: 6667 cm
Power Requirements
(Power Adapter):
Input Voltage:
Output Voltage:
(Arm Band - supplied with IC4): Rechargeable lithium battery
DO NOT dispose of this product as refuse. This product is to be recycled. For
proper disposal of this product, please follow the prescribed methods at an
approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Keep the workout area clear 0.6m (24") along the side used to access the machine and to the rear of
the machine. Allow a workout area of a minimum 1.15m x 1.85m (45.2" x 72.7").
Basic Assembly Tips
Follow these basic points when you assemble your
machine:
• Read and understand the "Important Safety In-
structions" before assembly.
• Collect all the pieces necessary for each assem-
bly step.
• Using the recommended wrenches, turn the
bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, carefully lift and look
through the bolt holes to help insert the bolt
through the holes.
• The assembly requires 2 people.
6
150 kg (330 lbs.)
48.1 kg (106 lbs.)
2.7 kg (6 lbs.)
2
100-240V AC, 50-60Hz, 0.5A
9V DC, 1.5A
1.15m
(45.2")
(1033.3 in
2
53.9 cm
(21.2")
123.7 cm
(48.7")
0.6m
24"
1.85m
(72.7")
131.6 cm
(51.8")
0.6m
24"