Schwinn a10 Owner's Manual page 9

3. Attach Seat to Seat Post and Frame
Note: Hardware is pre-installed on Seat and not on Hardware Card.
NOTICE: The Adjustment Knob is pre-installed on the Main Frame. Make sure the Adjustment Knob engages the Seat
Post.
Do not set the Seat Post position higher than the stop mark (MAX) on the tube.
!
X3
4. Install Console Mast on Main Assembly
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable.
4
7
5
X4
D
B
6mm
9