Specifications; Before Assembly - Schwinn AD2i Assembly Manual

Table of Contents

Advertisement

50"
(127 cm)
46" (117 cm)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation,
the location must be on a hard, level surface. Allow a workout area of a minimum 82" x 61"
(2.1m x 1.5m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
5. The assembly requires 2 people.
Maximum User Weight:
Power Requirements:
Operational Voltage: 1.0 - 3.3VDC
This product, its packaging, and components
!
contain chemicals known to the State of
California to cause cancer, birth defects, or
reproductive harm. This Notice is provided in
accordance with California's Proposition 65. If
you would like additional information, please
refer to our web site at
www.nautilus.com/prop65.
25" (63.5 cm)

SpECIfICATIONS

250 lbs. (113 kg)
2 AA batteries (LR6)
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad2

Table of Contents