Operational Instructions - Stamina 9161 Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON : Pedal movement or press any button.
POWER OFF : Automatic shut off after four minutes of inactivity.
FUNCTION BUTTONS:
MODE : Press to select display functions, include SCAN,
TIME, COUNT, CALORIES, and TOTAL COUNT.
Press and hold for three seconds to reset all
functions to zero, except TOTAL COUNT.
RESET : Press to reset all functions to zero, including
TOTAL COUNT.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, COUNT, CALORIES, and TOTAL COUNT
in sequence with change every four seconds. Press and release the MODE button until
"SCAN" appears on the display.
TIME: Displays the time from one second up to 99:59 minutes.
COUNT : Displays the total number of strides you have taken from zero to 9999 strides.
CALORIES: Displays the calorie consumption from zero to 999.9 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
TOTAL COUNT : Displays the total accumulated number of strides you have taken from zero to 9999 strides.
NOTE: 1. The meter will stop counting time automatically after four seconds of inactivity. All function
values will be kept. Restart the meter by pedal movement or press any button.
2. The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the MODE button and hold it down for three seconds to reset all functions
to zero, except TOTAL COUNT. Or press the RESET button to reset all functions to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the METER(39).
2. The METER(39) operates with an AA battery, the battery is not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Rechargeable batteries are not recommended.
14
SCAN TIME COUNT CAL TOTAL COUNT
AA Battery