ASSEMBLY INSTRUCTIONS
STEP 13:
There is an "R" decal on the RIGHT PEDAL ARM ASSEMBLY(8, 14), and an "L" decal on the
LEFT PEDAL ARM ASSEMBLY(8, 15). Attach the LEFT PEDAL ARM ASSEMBLY(8, 15) to the JOINT
PLATES(12) attached to the LEFT SWING ARMS(4, 5) with BUTTON HEAD BOLT(M8x1.25x73mm)(33),
LOCK WASHER(M8)(49), and NYLOCK NUT(M8x1.25)(43). NOTE: Make sure that all three BUTTON HEAD
BOLTS(M8x1.25x73mm)(33) and NYLOCK NUTS(M8x1.25)(43) are tightened enough so that the LEFT
PEDAL ARM ASSEMBLY(8, 15) will stay in its upright position when folded up. Repeat on the right side.
L
STEP 13
STEP 14
Slide the JOINT COVERS(18) in place on all four SWING ARMS
(4, 5, 6, and 7) on both sides.
11
R
STEP 13, NOTE