Stamina 9161 Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
(Pre-assembled on
the bottom side.)
STEP 3
Refer to the position of the REAR SUPPORT(2) in the above
illustration. Insert the REAR SUPPORT(2) into the UPRIGHT(1)
and secure with two BUTTON HEAD BOLTS(M8x1.25x14mm)
(36) and two ARC WASHERS(M8)(46) from the top side.
STEP 4
Turn the UPRIGHT ASSEMBLY(1, 2) over. Secure the REAR
SUPPORT(2) to the UPRIGHT(1) with two BUTTON HEAD
BOLTS(M8x1.25x14mm)(36) and two ARC WASHERS(M8)(46).
STEP 5
For additional security, tighten the BUTTON HEAD BOLT
(M8x1.25x45mm)(34) which is pre-assembled on the REAR
SUPPORT(2).
8