ASSEMBLY INSTRUCTIONS
STEP 15
Insert the LEFT HANDLEBAR(10) into the RIGHT HANDLEBAR(9)
and place them on the bracket on the UPRIGHT(1).
STEP 16
Secure the RIGHT and LEFT HANDLEBARS(9, 10) and the METER
BRACKET(13) to the UPRIGHT(1) with two BUTTON HEAD BOLTS
(M8x1.25x35mm)(35).
STEP 17
Install an AA battery into the METER(39), the battery is not included.
See page 14 for detailed battery installation instructions. Slide the
METER(39) onto the METER BRACKET(13). Plug the SENSOR
WIRE(40) into the METER(39), and push the excess wire into the
UPRIGHT(1).
12