Mass Storage Device - HP Probook 5320m Maintenance And Service Manual

Mass storage device

✎
The mass storage device spare part kit includes a bracket.
Description
Hard drive:
500-GB, 7200 rpm
320-GB, 7200 rpm
250-GB, 7200 rpm
Solid-state drive (only with computer models running Windows 7 operating system, either 2 GB or 4 GB):
128-GB
80-GB
Before removing the mass storage device, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the mass storage device:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.5×6.0 captive screws that secure the accessory cover to the computer.
3. Slide the rear edge 1 of the accessory cover to detach it from the computer.
4. Remove the accessory cover 2. The accessory cover is included in the Plastics Kit, spare part number
618835-001.
Maintenance and Service Guide
"Battery" on page 4-7).
Removal and replacement procedures
Spare part number
618829-001
581084-001
581083-001
581085-001
581086-001
4–9