Replacing The Backup Battery Of Cpc Card - Panasonic DBS 576 Technical Manual

Section 300-Installation
Replacing the Backup Battery of CPC
card
CPC96, CPC288, CPC576 Card
Guidelines
• The backup batteries on the CPC96, CPC288, and CPC576 cards backup data
Installation
1. Connect the new backup battery to the following connectors on the CPC96,
Note:
2. Cut the two tie-wraps using nippers to remove the old backup battery.
3. Secure the new backup battery using the two tie wraps.
Note:
576-13-300
CAUTION:
• Turn the power switch and make certain the AC cable is before replacing
the backup battery.
• The backup battery will last about 7 years. Be sure to replace the battery
before it is exhausted.
such as program settings, speed dialing data, and the date and time. Be sure to
replace the backup batteries before they are exhausted.
CPC288, and CPC576 cards:
Card Connector
CPC96 CN6 or CN7
CPC288 CN6 or CN7
CPC576 CN5 or CN6
The two connectors on each of these cards are connected in parallel.
Secure the battery so that it cannot move.
DBS 576 (USA), issued 6/2/98
Chapter 6. Peripheral Equipment
6-29