Connecting Dbs 576 And Dbs 96 Systems; Installation - Panasonic DBS 576 Technical Manual

Chapter 4. - Installing Additional Cabinets

Connecting DBS 576 and DBS 96 Systems

Installation

Guidelines
• Before deciding where to install the base cabinet and DBS 96, check the external
• See Chapter 3 for details of how to install the base cabinet. See the DBS
• Remove the covers from the base cabinet and DBS 96 (see page 3-2) to connect
• Figure 4-29 shows examples of combining base cabinet and DBS 96 systems.
• Only connect to DBS 96 cabinets. The CBLDBS MDF will not fit in a DBS 40
Figure 4-29. Example combinations of base cabinet and DBS 96
Note:
The numbers 1 to 5 are the cabinet ID numbers of the additional cabinets. If you are adding
two or more cabinets, each added cabinet must have a cabinet ID number (see page 4-27).
4-28
CAUTION:
• Turn the power switch and the external breaker OFF, and disconnect the AC
cable before connecting the systems.

  
•
• Do not attempt to move the base cabinet or DBS 96 without assistance.
• Do not attempt to connect the base cabinet and DBS 96 system using the
building block method.
dimensions shown for the base cabinet (page 4-1) and the DBS 96 (DBS
Installation and Programming Manual) and the areas required for maintenance.
Installation and Programming Manual for details of how to install the DBS 96.
the systems. See the DBS Installation Manual for how to remove the covers from
the DBS 96.
cabinet. Some DEC ports will not be available in the DBS 72 cabinets.
DBS 576 (USA), issued 6/2/98
576 base cabinet and DBS 96 carefully to avoid damage.
Section 300-Installation
576-13-300