Figure 4-22 Installation Of -48 Volt Power Supply (Vb-44022) - Panasonic DBS 576 Technical Manual

Section 300-Installation
4. Connect the provided 5-conductor power cable to the power connector on the
5. Connect the green lead to the cabinet ground terminal as shown.
6. Connect the black lead to the - 48 Volt terminal of the power supply.
7. Connect the orange lead to the SG terminal of the power supply.
8. Connect the red lead to the 24 Volt terminal of the power supply.
9. Connect the blue lead to the GND terminal of the power supply.
10. Connect the supplied green wire from the SG terminal of the power supply to
11. Reconnect the AC cable, turn the external breaker to ON and turn the power
Figure 4-22. Installation of -48 Volt Power Supply (VB-44022)
576-13-300
front of the -48volt power supply.
the upper Power Supply ground screw.
switch to ON.
DBS 576 (USA), issued 6/2/98
Chapter 4. - Installing Additional Cabinets
4-21