Dss; Figure 6-18 Dss Connection - Panasonic DBS 576 Technical Manual

Chapter 6. Peripheral Equipment

DSS

Guidelines
• The DSS (VB-44320) is a 72-key console that can be attached to a telephone. It
• If more than one DSS is assigned to a telephone, only one of the DSS can be
• The DSS comes with a mounting bracket, screws, and a two-conductor cable for
• Locate the DSS within 400 ft. (120m) of the cabinet. The maximum loop circuit
Installation
1. Attach the DSS to the key phone using the mounting plate and the four screws.
2. Connect the DSS to the key phone using the two-conductor cable.
3. Connect the DSS to the secondary socket using a four-conductor cable.
Figure 6-18. DSS connection
6-20
provides direct station selection and busy lamp fields for internal lines.
cabled from the same wall jack as the telephone. An additional DSS must be
cabled from separate wall jacks.
connecting the DSS to the key phone.
resistance to a DSS is 20 Ohms.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300