Specifications - Integra RFR-6 Instruction Manual

Specifications

The specifications and design of this product are subject to change without notice.
Hardware
Dimensions
Operating temperature
IR frequency range
Radio frequency (RF)
Cable
IR emitters
Accessories
Approvals
10
Red LED (continuously on when powered, blinking during RF reception)
16 IDs and 4 CHs
4 outputs for mono cable and IR emitters
Possibility to have multiple RF Receiver in one home not interfering
Positioning: freestanding, mounted horizontally or hanging up side down
4.5 x 3.2 x 1.2 inch (113 x 81 x 30 mm)
32 ˚F to 122 ˚F (0 ˚C to 50 ˚C)
Operating distance: 16 feet (5 meters)
IR frequency range: DC/flash codes, 36kHz-550kHz
Operating distance: approximately 100 feet (30 meters) depending on the
surrounding conditions
Frequency: 433.92 MHz
1/8 inch (3.5 mm) mono male to male
cable length: 7 feet (2.0 meters)
Number of IR emitters : 3
1/8 inch (3.5 mm) mono mini-plug
Cable length: 7 feet (2.0 meters)
Max. range: 3 feet (75 cm)
120V AC Power adapter (for USA and Canada)
230V AC Power adapter (for Europe and Australia)
Mounting kit (Plate and 4 screws)
The device complies with part 15.19(a)(3) of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any
interference received including interference that may cause undesired
operation.