Specifications - Integra DTR-20.7 User Manual

Specifications

Amplifier Section
Rated Output Power (North American)
With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 65
watts per channel minimum RMS power, with no more than 0.7% total
harmonic distortion from 250 milliwatts to rated output.
Surround Mode Output Power ()
(6 ohms, 1 kHz THD 0.9%) 115 W per channel
 Reference output for each speakers.
¼
Depending on the source and the listening mode settings,
there may be no sound output.
Rated Output Power (Others)
7 ch × 100 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)
Dynamic Power ()
 IEC60268-Short-term maximum output power
¼
160 W (3 Ω, Front)
125 W (4 Ω, Front)
85 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance (Unbalance)
200 mV/47 kΩ (LINE, 1 kHz 100 W/8 Ω)
Rated RCA Output Level and Impedance
1 V/470 Ω (SUBWOOFER PRE OUT)
100 mV/2.3 kΩ (ZONE2 LINE OUT)
1V/2.3 kΩ (ZONE2 PRE OUT)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
±10 dB, 20 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
Speaker Impedance
6 Ω - 16 Ω
Video Section
Signal level
1.0 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component Pb/Cb, Pr/Cr)
1.0 Vp-p/75 Ω (Composite)
Correspoinding maximum resolution
480i/576i (Component)
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 b/g/n standard
(Wi-Fi standard)
®
2.4 GHz band:
1 - 11 ch (North American)
1 - 13 ch (Others)
(Wi-Fi standard)
®
Bluetooth Section
Communication system
Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)
Maximum communication range
Line of sight approx. 15 m ()
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs
SBC
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
 The actual range will vary depending on factors such as obstacles between
¼
devices, magnetic fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna's performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
4.3 A (North American)
430 W (Others)
0.1 W (Stand-by, North American)
0.15 W (Stand-by, Others)
2.6 W (Network Standby)
60 W (No-sound)
Dimensions (W × H × D)
435 mm × 174 mm × 326.5 mm
17-1/8" × 6-7/8" × 12-7/8"
Weight
8.8 kg (19.4 lbs.) (North American)
9.0 kg (19.8 lbs.) (Others)
● HDMI
Input
IN1 (BD/DVD, HDCP2.2), IN2 (CBL/SAT, HDCP2.2), IN3 (STRM BOX,
HDCP2.2), IN4 (PC), IN5 (GAME), IN6
Output
OUT
Video Resolution
4K 60 Hz (RGB/YCbCr4:4:4/YCbCr4:2:2, 24 bit)
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS,
DTS Express, DSD, Multichannel PCM (up to 8ch)
Supported
3D, Audio Return Channel, Deep Color, x.v.Color™, LipSync, CEC, 4K,
Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601),
Content Type, 3D Dual View, 21:9 Aspect Ratio Video Format
● Video Inputs
Component
IN1 (BD/DVD), IN2 (GAME)
Composite
IN1 (CBL/SAT), IN2 (STRM BOX), IN3 (PC), AUX INPUT (front)
● Audio Inputs
Digital
OPTICAL 1 (CD), 2 (TV)
COAXIAL (BD/DVD)
Analog
BD/DVD, CBL/SAT, STRM BOX, PC, GAME, TV, CD, AUX INPUT (front)
● Audio Outputs
Analog
ZONE2 PRE/LINE OUT
2 SUBWOOFER PRE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK or HEIGHT or Bi-AMP
L/R, ZONE2 L/R
Phones
PHONES (Front, ø 6.3)
● Others
Setup Mic 1 (Front)
RS232 1
RI REMOTE CONTROL 1
USB 1 (Ver.1.1, 5 V/1 A)
Ethernet 1
IR IN 2 (A/B)/IR OUT 1
12V TRIGGER OUT 3 (A: 100 mA, B: 25 mA, C: 25 mA)
Supports multi-language on-screen display
(North American) English, German, French, Spanish, Italian, Dutch,
Swedish, Chinese ()
(Others) English, German, French, Spanish, Italian, Dutch, Swedish,
Russian, Chinese ()
 OSD is not displayed when the input selector is "NET" or
¼
"BLUETOOTH". Use the display on the main unit when operating
the unit.
Specifications and features are subject to change without notice.
Others
En-23