General Specifications - Integra DRX-7.1 Basic Manual

> Specifications > Advanced Setup > Listening Modes > Network Functions

General Specifications

■ Amplifier Section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, at 1 kHz;
rated 140 watts per channel minimum RMS power,
with no more than 0.08% total harmonic distortion
from 250 milliwatts to rated output.
Maximum Effective Output Power (North American)
260 W at 6 Ω, 1 kHz, 1 ch driven of 10% THD
Rated Output Power (IEC) (Australian)
9 ch × 200 W at 6 Ω, 1 kHz, 1 ch driven of 1% THD
Dynamic Power (＊)
＊ IEC60268-Short-term maximum output power
320 W (3 Ω, Front)
270 W (4 Ω, Front)
160 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.04% (1 kHz, 100 W, 8 Ω)
Input Sensitivity and Impedance
200 mV/82 kΩ (LINE (RCA))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/330 Ω (PRE OUT)
1 V/330 Ω (SUBWOOFER PRE OUT)
200 mV/1.2 kΩ (ZONE LINE OUT)
2 V/1.2 kΩ (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Tone Control Characteristics
±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
108 dB (IHF-A, LINE IN, SP OUT)
90 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 Ω - 16 Ω
Headphone Output Impedance
2
43 Ω
Headphone Rated Output
57 mW (32 Ω, 1 kHz, 10% THD)
■ Video Section
Signal level
1 Vp-p/75 Ω (Composite Video)
1 Vp-p/75 Ω (Component Video Y)
0.7 Vp-p/75 Ω (Component Video PB/PR)
Maximum resolution supported by component video
480i/576i
■ Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Australian)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (Australian)
Preset Channel
40
■ Network Section
Ethernet LAN
10BASE-T/100BASE-TX
■ General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 230 V, 50/60 Hz (Australian)
Power Consumption
330 W
Power Consumption (Standby mode)
0.2 W (Full Standby mode)
1.8 W (Network Standby mode) (＊1)
0.2 W (CEC standby mode) (＊2)
1.8 W (All on) (＊3)
＊1. Network Standby: On
> Basic Manual
Troubleshooting | Supplementary Information, etc.
＊2. HDMI CEC: On, HDMI Standby Through: Auto(Eco)
＊3. Network Standby: On, Auto Input Change: On, HDMI
CEC: On, HDMI Standby Through: Auto (Eco)
Dimensions (W × H × D)
435 mm × 197 mm × 446.5 mm
17-1/8" × 7-3/4" × 17-9/16"
Weight
19.0 kg (41.9 lbs.)
■ HDMI
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STRM BOX),
IN4 (GAME), IN5 (PC), IN6, IN7, AUX Input HDMI
(front)
Output
OUT MAIN (ARC), OUT ZONE 2/SUB
Supported
Deep Color, x.v.Color™, LipSync, Audio Return
Channel, 3D, 4K 60 Hz, CEC, Extended Colorimetry
(sYCC601, Adobe RGB, Adobe YCC601), Content
Type, HDR
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby
Digital Plus, DTS, DTS:X, DTS-HD Master Audio,
DTS-HD High Resolution Audio, DTS 96/24, DTS-
ES, DTS Express, DSD, PCM
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
■ HDBaseT™
IN : 1
OUT (＊) : 1
RS232 : 1 (Path through)
IR IN : 1 (Path through)
IR OUT : 1 (Path through)
＊ Maximum Video Resolution : 4k 60 Hz (YCbCr 4:4:4)
Use one of the following Ethernet cables to connect.
Cat6 (Category 6) cable: AWG23 cable or better, 100
m or less in length
Cat5e (Category 5e) cable: AWG24 cable or better,