Printing A Photo From A Usb Memory Key - Sagem MF 5890DN User Manual

Informations on the use of the photo USB memory key
• If your multifunction terminal cannot read the USB memory key that you are using, check that it
is compatible and that you have inserted it correctly.
• Once in place, do not remove the device before the multifunction terminal has finished all the
print commands.
• If the "MEDIA ERROR - WRITE ERROR" message is displayed during a recording or erasing
operation on a memory support, this means that the latter is write-protected. Recording or erasing
is possible only after this protection has been de-activated.
• A write-protected file (read-only) cannot be deleted from a memory support.
Remark: The Analyse Media function allows you at all times to consult the contents of the inserted USB memory key, and
this even if you have quit the media menu and the terminal is again in initial mode. Press
P
RINTING A PHOTO FROM A
Your multifunctional terminal is equipped with all the tools and connections needed to make it into an
independent photo printer. You can print out digital photos in black and white from a USB memory key.
Supported image files
You can use photo files that meet the following requirements:
Device format
File format
Image size
Supported resolution
N° of files recognised

Printing a photo from a USB memory key

When you insert a USB memory key in your multifunction terminal, the support is immediately
analysed. The number of files on the card is displayed (by increments of 5), and then the media menu
opens.
Select
on the numerical keyboard. You can directly access the photo print function by pressing the
key
Compatible DCF (Design Rule for Camera File System (Version
1.0))
JPG (JPEG) BASELINE Format
Maximum 6 Mb
between 76800 and 12 million pixels
Up to 999
by means of the
PRINT PHOTO
5-22
USB
MEMORY KEY
or keys, then validate with the OK key or type
Operation
/OK and 08.
1