From The Directory - Sagem MF 5890DN User Manual

Operation
S
ELECTING
Selecting black-and-white or colour
Black and white or colour mode is selected by pressing the
Resolution
You have several scan modes available to send your documents.
The choice of the mode depends on the document to be sent:
• Normal mode,
details,
• Fine mode,
or small characters,
• Super Fine mode,
lines) or very small-size characters (on condition that the receiving fax can reproduce them),
• Photo mode,
To select the resolution mode:
Press
screen shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If the document is light, you
must raise the contrast and if it is dark, you must reduce it.
To set the contrast:
Press
position of a cursor.

From the directory

Dialling alphabetically
Enter the first letter of your subscriber's name with the alphanumeric keypad, then add the
remaining letters until your subscriber's name is complete.
R
ESOLUTION
, is to be used for good-quality documents without drawings or small
, below the display screen, is to be used for documents that include drawings
, is to be used for documents that include drawings (with very thin
, is to be used for photographic documents (except those in colour).
key as many times as necessary to select the required mode. An icon on the
as many times as necessary to choose the desired contrast, as shown by the
D
IALLING
5-3
/C
ONTRAST
key.