Installation When Using Internet Printing Protocol (IPP)
This section describes how to install the machine using Internet Printing Protocol (IPP).
The following shows the reference section for each procedure.
Step 1 Preparations.................................................................................................................. 439
Step 2 Configuration on the Machine ................................................................................... 439
Step 3 Configuration on the Computer................................................................................. 440
Dell Printer Configuration Web Tool Setting Items ............................................................ 440
Note
Step 1 Preparations
The following items are required to set up the machine to use Internet Printing Protocol
(IPP).
• TCP/IP network environment
• The Driver CD Kit (provided with the machine)
Step 2 Configuration on the Machine
The following describes the configuration procedures to use Internet Printing Protocol (IPP)
on the machine. Enable the IPP port, and then configure TCP/IP settings.
Note
For the items that can be configured using Dell Printer Configuration Web Tool, refer to "Dell Printer
Configuration Web Tool Setting Items" (P.440).
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
3) Select [Tools] on the [Home] screen.
2
Enable the IPP port.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [IPP], and then select [Change Settings].
4) Select [Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
• If the size of print data sent via IPP is larger than the value set in the proxy server, the machine cannot
receive the data. In this case, set a larger value in the proxy server or change your browser setting not
to use the proxy server.
• You can configure the settings using Dell Printer Configuration Web Tool.
• The default user ID is "admin".
• The default passcode is "1111".
Installation When Using Internet Printing Protocol (IPP)
439