Daylight Savings - Dell C5765dn User Manual

Set Lockout Duration
Set the time period to disable printing. Specify the start and end time to disable printing in
1 minute increments.
Allow User to Lock Out
Selecting [Lock Out Printer] on the [Home] screen temporarily disables printing. [Release
Printer] is displayed during the printer lockout duration. Selecting [Release Printer] enables
printing.
Note
Power Saver Timers
The Power Saver mode has two modes: the Low Power and Sleep modes. When a specified
period of time has elapsed, the machine switches to these modes in the following order to
reduce power consumption.
Last operation on the machine
Note
From Last Operation to Low Power Mode
Specify a time period between 1 and 120 minutes in 1 minute increments to enter the Low
Power mode after the last operation.
From Last Operation to Sleep Mode
Specify a time period between 1 to 120 minutes in 1 minute increments to enter the Sleep
mode after the last operation.
Note
Time Zone
Set the time difference from GMT between -12 and +12 hours.
Note

Daylight Savings

You can set daylight saving time. During daylight saving time period, the machine moves the
clock forward by one hour.
Select from [Adjust Off], [Adjust by Day, Month & Time], or [Adjust by Month, Week, Day
of Week & Time].
• A job started before the start time will be printed continuously even after elapsing the start time. The
job will be printed continuously even if you select [Lock Out Printer] while printing. After the job is
completed, the machine enters the printer lockout status.
• When both [Set Lockout Duration] and [Allow User to Lock Out] are set and the start time comes while
the [Release Printer] button is displayed, the machine automatically enters the printer lockout status.
• When you select [Release Printer] during the printer lockout duration, printing is enabled, and when
you then select [Lock Out Printer], the machine resumes the printer lockout status.
• The printer lockout status is not released automatically even after the end time elapsed. To release the
printer lockout status, the control panel operation is required.
• The printer lockout duration will not be released even when you switch the power off and then on
again, or even when you press the <Power Saver> button while the machine is in the Power Saver
mode (Low Power mode or Sleep mode).
• The machine starts printing in accordance with the setting in [Auto Print] when [Release Printer] is
selected. Thus the printing may not start just after [Release Printer] is selected.
• You can also print during the printer lockout duration by selecting a job in [Active Jobs] on the [Job
Status] screen and then selecting [Promote Job].
• When the [Allow User to Lock Out] check box is deselected, [Disable Auto Printing] in [Home -
Additional Features] is displayed as [(Not Assigned)].
• You cannot configure the machine not to switch to the Low Power mode or the Sleep mode.
• Configure the [From Last Operation to Sleep Mode] time to be longer than the [From Last Operation to
Low Power Mode] time.
• GMT stands for Greenwich Mean Time.
Low Power mode Sleep mode
Common Service Settings
297