Proxy Server Settings - Dell C5765dn User Manual

15 Tools
• Account name: mymail
• Host name: myhost
• Domain Name: example.com
When receiving E-mails via POP3
Enter the POP user name (on the left side of @) and incoming POP3 mail server name in
the address section (on the right side of @). You can set an alias, such as
mymail@example.com.
For Example: mymail@myhost.example.com
• Account name: mymail
Machine Name
Enter the machine name with up to 32 single-byte characters.
Host Name
Enter the host name with up to 16 single-byte characters.
Note
Domain Name
Enter the domain name with up to 64 single-byte characters.

Proxy Server Settings

Configure the settings for a proxy server.
Configure a proxy server when inbound/outbound access is used.
Note
Use Proxy Server
Select whether or not to use a proxy server.
Proxy Server Setup
Select the proxy server specification from [Same Proxy for All Protocols] or [Different Proxy
for Each Protocol].
Addresses to Bypass Proxy Server
Enter addresses not using the proxy server. You can specify the addresses by IPv4 address,
IPv6 address, and FQDN. You can use wildcards "*" for specifying the addresses.
HTTP Proxy Server Name
Enter the server name or IP address of the HTTP proxy server. Up to 255 characters are
allowed. You can specify the addresses by IPv4 address, IPv6 address, and FQDN.
HTTP Proxy Server Port Number
Set the HTTP proxy server port number from 1 to 65535.
The default value is 8080.
Note
332
• For SMB, only the first 15 single-byte characters will be used as the Host Name.
• Do not set this item unless you use services requiring proxy server settings.
• Do not use the numbers assigned to the other ports.