Removing the driver
Your computer may fail to correctly recognize the A-500S if the driver could not be installed according to the
specified procedure. If so, you'll need to delete the driver that was detected by mistake. Use the following procedure
to remove the driver, and then install the driver once again according to the procedure given in "Driver Installation
and Settings" (p. 13).
Windows users
* The displayed content may differ depending on your system.
1.
Start up Windows with the A-500S disconnected.
* Make sure that all USB cables other than those for a USB keyboard and USB mouse (if used) are disconnected.
* Log on using a user name whose account type is computer administrator (such as Administrator).
2.
Insert the included A-500S CD-ROM into your computer's CD-ROM drive.
3.
On the CD-ROM, navigate to the following folder and double-click Uninstal.exe.
Windows 7
Windows Vista
Windows 7 64-bit edition
Windows Vista 64-bit edition
Windows XP
4.
A user account control dialog box will appear; click [Yes] or [Continue].
5.
The screen will indicate "The installed A-500S Driver will be uninstalled." Click [OK].
* If any other message appears, proceed as directed by the message.
6.
The screen will indicate "Uninstallation was completed." Click [OK] to restart Windows.
Open the folders [Driver] and then [Win7]
Open the folders [Driver] and then [Vista]
Open the folders [x64Driver] and then [Win7]
Open the folders [x64Driver] and then [Vista]
Open the folders [Driver] and then [XP]
Appendices
55