Roland Cakewalk A-500S Owner's Manual page 23

Caution when recording or playing back with your software
Check the following points before you use the A-500S to record or play back.
• Connect the A-500S to your Macintosh and turn on the power before you start up your software.
• Do not switch off the power to the A-500S or disconnect the USB cable from your Macintosh while the software is
running. Close the software you're using before you disconnect the A-500S's USB cable from your Macintosh.
• The A-500S will not work with the Mac OS X Classic environment. Use the A-500S when the classic environment is
not running.
This completes driver installation and settings.
Driver Installation and Settings
23