Roland Cakewalk A-500S Owner's Manual page 22

Driver Installation and Settings
5.
Specify the Device Name for the new external device.
1. Click the new external device you added to select it, and then click Show Info.
2. In the Device Name field, enter a name for the device. Enter the following name for each new
external device.
Device Name
Connect the ▼ and ▲ symbols (which signify the outputs and inputs) of the A-500S icon to those of the
6.
new external device icon by using the mouse to drag between them.
fig.osx3-j
7.
Check to make sure that MIDI transmission and reception takes place normally. Proceed as follows.
1. Click Test Setup.
2. Try playing the keyboard of the A-500S. If the corresponding port's arrow in the MIDI Studio or
Audio MIDI Settings dialog box blinks, the settings are made correctly.
3. Click Test Setup once again to end the test.
8.
Close the MIDI Studio dialog box
22
First Second
A-500S MIDI OUT A-500S
or
Audio MIDI Setup dialog box. This completes the settings.
Use the mouse to drag
a connection