Use MIDI Functionality
Transmitting a GM2 system on message
This lets you transmit a GM2 system on message.
fig.panic-1
3
fig.utl
1.
Simultaneously hold the [MIDI CH] button and [PGM CHANGE] button
down.
The display will indicate "UTL," and the A-500S enters UTILITY mode.
fig.gm2
2.
Press the [GM2 SYS ON] key.
The display will indicate "GM2" and blink.
fig.fig.enter
3.
Press the [ENTER] button.
* The setting will be cancelled if you press another button instead of the [ENTER] button.
The GM2 system on message has now been transmitted.
44
1
2